UNS N04400 (Monel 400)

Short Introduction:

  • Monel 400£¬Alloy400£¬UNS N04400 SEW VDIUV W.Nr.2.4360 NiCu30Fe /BS NA 12 /AFNOR Nu 30 is an extremely combination property that use for largest amount and most widely corrosion resistance alloy. This alloy in the hydrofluoric acid and fluoride gas medium with excellent corrosion resistance, as well as to the hot concentrated alkali. At the same time, is also corrosion resistant to neutral solution, sea water, air, organic compounds. An important feature of this is generally do not generate a stress corrosion cracking, good cutting performance.

 

Category: 

Description

Monel 400/ UNS N04400

Material grades and equivalents

Nonel 400/ Alloy400 /UNS N04400 / SEW VDIUV W.Nr.2.4360 NiCu30Fe /BS NA 12 / AFNOR Nu 30

 

Monel 400 Chemical composition

Alloy % Ni Cu Fe C Mn Si S
Monel 400 Min. 63 28
 Max.  34  2.5  0.3  2  0.5  0.024

 

 Monel 400 Physical properties

Density 8.83 g/cm³
Melting point 1300-1390 ℃

 

 

 Monel 400  Alloy minimum mechanical properties in the room temperature

 Alloy state Tensile strengthRm N/mm² Yield strengthR P0. 2 N/mm² ElongationA 5 %
 Monel 400 480 170 35

 

Characteristic as below:

  • Monel 400 is an extremely combination property that use for largest amount and most widely corrosion resistance alloy. This alloy in the hydrofluoric acid and fluoride gas medium with excellent corrosion resistance, as well as to the hot concentrated alkali. At the same time, is also corrosion resistant to neutral solution, sea water, air, organic compounds. An important feature of this is generally do not generate a stress corrosion cracking, good cutting performance.

Monel 400 Metallurgical structure

Corrosion resistance

  • Monel 400  alloy in the fluoride gas, hydrochloric acid, sulfuric acid, hydrofluoric acid and their derivatives have a very good corrosion resistance property, and possess better corrosion resistance more than the copper alloy in the sea water. Acid medium: HY M400have corrosion resistance in less than 85% consistency of sulfuric acid. Monel 400 is an important material that resistant to hydrofluoric acid. Water corrosion:  Monel 400 in most corrosion cases of water, not only excellent corrosion resistance, but also less pitting, stress corrosion, the corrosion rate less than 0.025mm / a. High temperature corrosion: HY  Monel 400 for the work of the highest temperature at about 600 ℃ in general in the air, in the high temperature steam, the corrosion rate less than 0.026mm / a. Ammonia: HY M400 can be resistant to an hydrous ammonia and aminate conditions corrosion below 585 ℃ due to the high nickel.
Monel 400 Application field:

Monel 400 alloy is a multi-purpose material in many industrial applications:

  1. Seamless water pipe in the power factory
  2. Sea-water exchanger and evaporator
  3. Sulfuric acid and hydrochloric acid environment
  4. Crude distillation
  5. Sea-water in the use of equipment and propeller shaft
  6. Nuclear industry and used in the manufacture of uranium enrichment isotope separation equipment
  7. Manufacturing hydrochloric acid equipment used in the production of pump and valve

 

Specification:

 

Pipe Smls Pipe Welded Tube Smls Tube Welded  Sheet/Plate  Bar  Forging  Fitting  Wire
B165 B725 B163 B127 B164 B564 B366

 

Leave a Reply

Comment
Name*
Mail*
Website*